Baumit GranoporTop



  • Ready-to-use, pasty, synthetic-resin thin-layer final coat
  • Rubbed up or grooved structure
  • Interior and Exterior use
  • Applied manually and by machine
  • 888 standard colours

Product Overview

A topcoat render application providing decoration and protection to facades.  For application over old and new mineral (Sand cement based ) and organic coatings, concrete surfaces, and mineral and organic basecoats in the Baumit EWI Systems EPS, XPS and XS 022.

Grain Size

1.5mm, 2mm, 3mm

Color Range

The ready to use systems are supplied pre mixed in 25Kg tubs with 888 colours available from our colours of life range or any RAL number. Special colour matching is also available through our dedicated colour lab in Austria.

Preparation and Applicaton

The substrate must be checked and free of water repellents, dust, dirt, efflorescence and other harmful contaminants or materials that may interfere with the adhesive bond. Power washing maybe required before application. Remove projecting mortar or concrete parts mechanically as required.

Application: The GranoporTop is applied with a stainless steel trowel or a fine spray machine and trowelled through to the grain thickness to produce a full and even coat. The surface is then textured using a plastic float, moving in tight circular motions.

It should be applied systematically and continuously in complete sections

Packaging, Health & Safety

Each component of the Baumit system has its own materials data sheet, if further information is required please contact our sales of technical department.

Technical Information