Features & Benefits
-
- XS022 Phenolic System is the highest thermal performance of all insulation systems.
- Available in 10mm increments with thickness from 20mm to 100mm with double layering possible if greater thickness are required.
- XS022 Phenolic system is fireproof and is used on high rise building without the need for additional firebreaks and commercial and residential building with high risk of fire.
Product Overview
XS022 Phenolic system is the highest performance External Insulation system on the market that gives thermal insulation to your building.
Available in 1200mm x 600mm sheets in thicknesses from 20mm to 100mm. If thicker sheets are required to reach a U value the system can be double layered.
Once installed give a new long lasting look to your building.
It is particularly useful when buildings are being highly insulated and when thinner sections of board are required to reach a given target u value.
Baumit XS022 Phenolic system are adhesively bonded to the wall, with additional mechanical fixings. Then a reinforced mesh coat is placed over the boards and troweled off.
Once dried and cured a wide range of finishes can be applied, from Acrylics (GranoporTop) Silicone enhanced (Silicon Top) or the self-cleaning photocat product (NanoporTop). Additionally mineral sand and cement based products such as SEP, Dry Dashing, Edelputz (wet dash) or brick slips can be applied.
The ready to use systems are supplied pre mixed in 25Kg tubs with 888 colours available from our colours of life range or any RAL number.
Special colour matching is also available through our dedicated colour lab in Austria.
*Note XS022 system cannot get wet during the install procedure.
Preparation and Applicaton
The substrate must be checked and free of water repellents, dust, dirt, efflorescence and other harmful contaminants or materials that may interfere with the adhesive bond. Power washing maybe required before application. Remove projecting mortar or concrete parts mechanically as required.
The installation of the Baumit External Insulation Systems is carried out by Grafton Merchanting ROI trained and approved installers in accordance with Grafton Merchanting ROI project specific specifications and method statements.
Packaging, Health & Safety
Each component of the Baumit system has its own materials data sheet, if further information is required please contact our sales of technical department.